DFI K8M800 INFINITY User Manual page 58

3
BIOS Setup
3.1.2.2 CPU Internal Cache and External Cache
These fields speed up the memory access. The default is Enabled,
which provides better performance by enabling cache.
3.1.2.3 CPU L2 Cache ECC Checking
The processors supported by the system board come with built-in
Level 2 cache. By default, ECC is enabled to check the Level 2 cache.
If you are not using this function, set this field to Disabled.
3.1.2.4 Quick Power On Self Test
This field speeds up Power On Self Test (POST) whenever the
system is powered on. The BIOS will shorten or skip some check
items during POST. To attain the shortest POST time, select "Ena-
bled".
3.1.2.5 First Boot Device, Second Boot Device, Third Boot Device and
Boot Other Device
Select the drive to boot first, second and third in the "First Boot
Device" "Second Boot Device" and "Third Boot Device" fields
respectively. The BIOS will boot the operating system according to
the sequence of the drive selected. Set "Boot Other Device" to
Enabled if you wish to boot from another device.
3.1.2.6 Swap Floppy Drive
When this field is enabled and the system is booting from the floppy
drive, the system will boot from drive B instead of drive A. When
this field is disabled and the system is booting from the floppy drive,
the system will boot from drive A. You must have two floppy drives
to use this function.
58