DFI K8M800 INFINITY User Manual page 81

PowerOn by PCI Card
Enabled This field should be set to Enabled only if your PCI
card such as LAN card or modem card uses the PCI
PME (Power Management Event) signal to remotely
wake up the system.
card will cause the system to wake up.
card's documentation for more information.
Disabled The system will not wake up despite access to the
PCI card.
Wake Up on LAN/Ring
This field allows you to enable the Wake-On-LAN and Wake-On-
Ring function. When enabled, it will remotely wake up the system via
the network. or via an external modem.
RTC Alarm Resume
Enabled When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on in the "Date (of Month)" and "Resume
Time (hh:mm:ss)" fields. However, if the system is be-
ing accessed by incoming calls or the network prior
to the date and time set in these fields, the system
will give priority to the incoming calls or network.
Disabled Disables the automatic power-on function. (default)
Date (of Month)
0 The system will power-on everyday according to the
time set in the "Resume Time (hh:mm:ss)" field.
1-31 Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the "Resume Time (hh:mm:ss)" field.
Resume Time (hh:mm:ss)
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the "Date
(of Month)" field, the time set in this field must be later than the
time of the RTC set in the Standard CMOS Features submenu.
Access to the LAN card or PCI
3
BIOS Setup
Refer to the
81