DFI K8M800 INFINITY User Manual page 77

3.1.5.3 HDD Power Down
This is selectable only when the Power Management field is set to
User Define. When the system enters the HDD Power Down mode
according to the power saving time selected, the hard disk drive will
be powered down while all other devices remain active.
3.1.5.4 Suspend Mode
This is configurable only when the Power Management field is set to
"User Define". When the system enters the power saving time set in
this field, the CPU and onboard peripherals will be shut off.
3.1.5.5 Video Off Option
Always On
Suspend -> Off
3.1.5.6 Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to turn
Blank Screen
DPMS
3.1.5.7 MODEM Use IRQ
This field is used to set an IRQ channel for the modem installed in
your system.
The system BIOS will never turn off the screen.
The screen is off when the system is in the
Suspend mode.
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initializes display power management signaling. Use
this option if your video board supports it.
3
BIOS Setup
77