Skierg Warranty - Concept2 SKIERG Product Manual

nspect the Fasteners
I
Be sure all fasteners are tight and have
not become loose during use . If your
SkiErg is wall mounted, examine the
wall mount fasteners carefully .
Inspect the Top Bracket Pulleys
Be sure the pulleys spin freely in the
pulley housings and that the pulley
housings swing freely in the pulley
brackets .
Pulley Housing
Pulley
As needed
• Clean surfaces of the SkiErg,
including floor or floor stand base,
with any non-abrasive household
cleaner. DO NOT spray any fluid
onto the PM .
• Dust and lint can collect inside
of the flywheel enclosure. This
buildup can restrict airflow reducing
the resistance of the fan . The outer
cover of the fan enclosure can be
removed for cleaning by removing
the four screws that hold the cover
together . See illustrations .
Flywheel Opening and Cleaning
1.
3.
5.
7.

SKIERG WARRANTY

Concept2 SkiErgs are backed by a limited 2 year and 5 year
warranty . For complete warranty information in the U .S . and
Canada, visit concept2 .com/ski . For warranty information
outside the U .S . and Canada, contact the authorized Concept2
dealer in your territory . A list of authorized Concept2 dealers
can be found at concept2 .com/international . If you do not find
a local dealer in your territory visit concept2 .com/ski or email
info@concept2skierg .com .
6
2.
4.
6.
IMPORTANT:
The Performance Monitor
(PM) is a sealed unit . DO
NOT TAKE APART . Any
attempt to disassemble
will void warranty . Contact
Concept2 if there are
problems with the PM .