Report Settings Menu - Canon FAX-L220 User Manual

REPORT SETTINGS Menu

For details on accessing the settings below, see p. 14 3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
TX REPORT
PRINT WITH IMAGE If you select
RX REPORT
ACTIVITY REPORT
Chapter 14
Description
Enables/disables automatic printing of a TX
(transmission) REPORT (
PRINT ERROR ONLY : Prints a report only when a
transmission error occurs.
OUTPUT YES : Prints a report every time you send a
document.
OUTPUT NO : No report is printed.
PRINT ERROR ONLY
above, this setting enables/disables printing of the first
page of the fax under the report.
Enables/disables automatic printing of an RX (reception)
REPORT ( p. 11 5).
OUTPUT NO : No report is printed.
PRINT ERROR ONLY
: Prints a report only when a
reception error occurs.
OUTPUT YES : Prints a report every time you receive a
document.
Enables/disables automatic printing of an ACTIVITY
REPORT after every 20 transactions (
p. 11 4).
OUTPUT YES
or
p. 11 3).
Summary of Settings
Sub Settings
PRINT ERROR ONLY
OUTPUT YES
OUTPUT NO
ON
OFF
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
AUTO PRINT ON
AUTO PRINT OFF
14 5