Time & Date - Danfoss ECL Comfort 310 Installation Manual

Installation Guide
7.2 Time & Date
It is only necessary to set the correct date and time in connection
with the first use of the ECL Comfort controller or after a power
break of more than 72 hours.
The controller has a 24 hour clock.
Aut. daylight (Daylight saving time changeover)
YES: The controller's built-in clock automatically changes + /
- one hour on the standardized days for daylight saving
time changeover for Central Europe.
You change manually between summer and winter time
NO:
by setting the clock backward or forward.
Danfoss District Energy
ECL Comfort 210, application A260
When controllers are connected as slaves in a master / slave system
(via ECL 485 communication bus), they will receive 'Time & Date' from
the master.
VI.LG.F1.02 DEN-SMT/DK 89