Adjusting The Ecl Card Settings; Setting The Time And Date - Line A - Danfoss ECL Comfort L76 User Manual

16
Adjusting the ECL Card
settings
General principles
When the controller is connected and operating you can
check and adjust all or some of the basic settings. Turn the
ECL Card so that the grey side is facing you (see the example
below).
Use the arrow buttons to move from line to line of
the ECL Card, for example line 2:
1 1 2
ON ON
Circuit
Line
2
Setting
4 0
to be
adjusted
Value in range indicator
Use the plus / minus buttons to adjust the
settings.
In some displays more than one setting or value
can be adjusted. Use the shift button to switch
between the options.
The circuit selector shifts between circuit I
and II. You can adjust all settings and service
parameters individually.
Update of the ECL Card after maintenance and service
All new settings can be stored on the ECL Card. For details
about copying, see section 34.
The grey
side of the
ECL Card
2 3
ON
9 0
Setting the time and date -
line A
Actual time
A
1 0 3 5
1 0 7
Year
Use the shift button to switch between minutes,
hours, years, months and days.
Set the correct time and date.
In case of a power break, which lasts longer than 12 hours, the
time and the date have to be set again. All other settings are
stored as programmed.
Use the yellow side of the card to change the schedules.
See User's Guide, section 4.
17
0 2 2 2
Month, day
The grey
side of the
ECL Card