Installation Guide
3.0 Daily use
3.1 How to navigate
You navigate in the controller by turning the dial left or right to
the desired position (
).
The dial has a built-in accellerator. The faster you turn the dial, the
faster it reaches the limits of any wide setting range.
The position indicator in the display ( ) will always show you where
you are.
Push the dial to confirm your choices ( ).
The display examples are from a two-circuit application: One
heating circuit ( ) and one domestic hot-water (DHW) circuit ( ).
The examples might differ from your application.
Some general settings which apply to the entire controller are
located in a specific part of the controller.
To enter 'Common controller settings':
Action:
Purpose:
Choose 'MENU' in any circuit
Confirm
Choose the circuit selector at the top
right corner in the display
Confirm
Choose 'Common controller settings'
Confirm
Danfoss District Energy
ECL Comfort 210, application A260
Examples:
Heating circuit ( ):
VI.LG.F1.02
DHW circuit ( );
Circuit selector
DEN-SMT/DK
33