Important Safety And Product Information - Danfoss ECL Comfort 310 Installation Manual

Installation Guide

1.1 Important safety and product information

1.1.1 Important safety and product information
This Installation Guide is associated with ECL Application Key A260
(order code no. 087H3801).
The functions can be realized with ECL Comfort 210 and ECL
Comfort 310.
Additional documentation for ECL Comfort 210 and 310, modules
and accessories is available on http://den.danfoss.com/.
2 DEN-SMT/DK
ECL Comfort 210, application A260
Safety Note
To avoid injury of persons and damages to the device, it is absolutely
necessary to read and observe these instructions carefully.
Necessary assembly, start-up, and maintenance work must be
performed by qualified and authorized personnel only.
The warning sign is used to emphasize special conditions that should
be taken into consideration.
This symbol indicates that this particular piece of information should
be read with special attention.
As this Installation Guide covers several system types, special system
settings will be marked with a system type. All system types are shown
in the chapter: 'Identifying your system type'.
°C (degrees Celsius) is a measured temperature value whereas K
(Kelvin) is a number of degrees.
VI.LG.F1.02
Danfoss District Energy