Regulations Covering Pellet Stove Installation; Before Operating Your Stove - Drolet Eco-65 DP00060 Installation And Operation Manual

Eco-65 Installation and Operation Manual
•
MIXING OF APPLIANCE
COMPONENTS IS PROHIBITED AND WILL VOID THE WARRANTY.
•
ANY MODIFICATION OF THE STOVE THAT HAS NOT BEEN APPROVED IN WRITING BY THE
TESTING AUTHORITY IS PROHIBITED AND VIOLATES CSA B365 (CANADA), AND ANSI NFPA 211
(USA).
•
STOVE BUILDER INTERNATIONAL INC. (SBI) GRANTS NO WARRANTY, IMPLIED OR STATED, FOR
THE POOR INSTALLATION OR LACK OF MAINTENANCE OF YOUR STOVE AND ASSUMES NO
RESPONSIBILITY OF ANY CONSEQUENTIAL DAMAGES.

2.2 Regulations Covering Pellet Stove Installation

When installed and operated as described in these instructions, this pellet stove is suitable
for use as a freestanding heater in residential installations.
In Canada, the CSA B365 Installation Code for Solid Fuel Burning Appliances and Equipment
and the CSA C22.1 Canadian National Electrical Code are to be followed in the absence of
local code requirements. In the USA, the ANSI NFPA 211 Standard for Chimneys,
Fireplaces, Vents and Solid Fuel-Burning Appliances and the ANSI NFPA 70 National
Electrical Code are to be followed in the absence of local code requirements.
This stove must be connected to a pellet vent system complying with the requirements for
Pellet Vent in the standards UL 103, UL 641, ULC S629M, CAN/ULC S609 and ULC/ORD
C441 or to a code-approved masonry chimney with a stainless steel flue liner.

2.3 Before Operating Your Stove

Some minor installation and adjustment are required prior to use:
• The handle and door must be adjusted; (see section 7.1.10: Door Adjustment)
• The stove must be leveled using threaded legs;
• Make sure the fresh air intake back draft shutter works freely.
• Make sure to remove all tools or accessories that have been inserted in the stove for
transportation purposes (see following illustration.)
10
COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING