Eco-65 Installation and Operation Manual
Displays the temperature read by the thermistor.
Push any control key to proceed.
Convection blower test.
Push the
control key to proceed.
Combustion blower test.
Push the
control key to proceed.
Exhaust blower test.
Push the
control key to proceed.
Ignitor test.
Push the
control key to proceed.
Auger# 1 test.
Push the
control key to proceed.
Auger#2 test.
Push the
control key to proceed.
Validate the absence of an SD card in the reprogramming
port. Push any control key to proceed.
Validate that the control board's EEPROM is functional.
Push any control key to proceed.
End of the test mode sequence.
The stove turns on by itself.
49