Drolet Eco-65 DP00060 Installation And Operation Manual page 36

Eco-65 Installation and Operation Manual
Using the provided sweeping rod, sweep up and down each exchanger. Make sure you go all
the way down to the bottom.
Reinstall the access panel to the combustion chamber and tighten the wing nuts.
DO NOT USE PLIERS OR OTHER TOOLS TO TIGHTEN THE WING NUTS.
To clean the baffle, pivot the lock plate by 90° found above the access door of the
combustion chamber. The baffle will rotate and drop the accumulated fly ash. Clean and
reinstall the baffle.
To remove the baffle (for a replacement) pivot the lock plate by 90°. When the baffle has
ended its rotation, place the lock to its initial position. Lift the baffle above its pivots and lower
it by gently pulling towards you. To take it out of the door, you must rotate it slowly towards
you to avoid hitting the walls of the combustion chamber.
36