Appendix C: Mobile Home Installation - Drolet Eco-65 DP00060 Installation And Operation Manual

Eco-65 Installation and Operation Manual

APPENDIX C: MOBILE HOME INSTALLATION

Anchor the stove
WARNING: FOR MOBILE HOME INSTALLATION, IT IS MANDATORY TO CONNECT
THE STOVE TO AN OUTSIDE COMBUSTION AIR SOURCE. (SEE APPENDIX D:
COMBUSTION AIR SUPPLY).
When installed in a mobile home, the stove must be anchored to the floor with two screws.
Use the two anchoring holes (A) located for this purpose on each side of the pedestal, as
shown on the following image.
For use in a mobile home in Canada, this pellet stove must be connected to a vent system
certified according to the standard or ULC/ORD-C441 CAN/ULC-S609. A vent system
meeting the requirements of ULC S629M can also be used.
For use in a manufactured home in the United States, this pellet stove must be connected
to a venting system that meets the requirements of UL 641 standard. A vent system that
meets the requirements of UL 103 standard may also be used.
91