Eco-65 Installation and Operation Manual
7.1.9 Door Gasket Maintenance
It is important to maintain the door gasket in good condition. After a while, the gasket will
wear and compress; adjusting the door may then be required. If the door adjustment is not
sufficient, replace the door gasket with a genuine part. If the stove door is not properly
sealed, it will be difficult to keep the door glass clean and combustion gases may leak into the
room.
7.1.10 Door Adjustment
In order for your stove to burn at its best efficiency, the door must provide a perfect seal with
the firebox. Therefore, the gasket should be inspected periodically making sure to obtain an
air tight fit. Air tightness can be improved with a simple latch mechanism adjustment. To
adjust:
Remove the lock pin by pulling and
turning with pliers. Turn the handle
counter clock wise one turn to increase
pressure.
44
Re-install the lock pin (spring pin) with
a small hammer