16
en | Installing a Surface Mount (AUTODOME 4000)
5
Installing a Surface Mount (AUTODOME 4000)
Use the following illustration as a guide for installing the camera directly onto the ceiling
(surface mount):
Figure 5.1: Mounting diagram
Number
1
2
3
4
5
6
7
8
Caution!
To prevent humidity problems, the camera must be installed in dry conditions, and the cable
!
leads should be sealed after they are connected.
1.
2.
2015.08 | |
Description
Drilling template
6 x 30 mm plastic anchor
Camera base
O-ring
#8 x 32 screw
Safety strap (will hold item #7 dome cover for easy installation)
Dome cover
M4 x 12 Torx screw
Determine a secure location that can support the weight of the dome.
Use the template (refer to , page 16, item 1) to mark the locations of the four screw holes
and the cable conduit.
Operation Manual
AUTODOME 4000 Mini PTZ Dome
Bosch Security Systems, Inc.