Calibration - Bosch VEZ-400 Series Operation Manual

AUTODOME 4000 Mini PTZ Dome
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.6.4

Calibration

Calibration is a function for automatically correcting an error on the angle of Pan/Tilt.
Calibration can be set at Auto or Manual. In Auto mode, the camera is corrected automatically
whenever there is an error on the angle of the camera. The motor of the Pan/Tilt will adjust its
angle automatically. In Manual mode, select the option "Calibration" to execute the function.
Error Message Display is a function for displaying an error message to let a user know when
there is an error.
1.
2.
CALIBRATION SETUP
AUTO CAL
ERROR MSG DISP
CALIBRATION
SAVE
BACK
1.
2.
3.
4.
5.
6.
7.
Bosch Security Systems, Inc.
Select the option "Action."
Select the appropriate value:
– Home
– Preset
– Scan
– Tour
Select the option "Number."
Set the number for the action. For example, if "Action" is "Preset" and "Number" is "001,"
this means Preset 1.
Select the option "Time." This is the dwell time, the amount of time that the joystick
controller can be idle before the camera returns to Home, a preset, a scan, or a tour.
Set the desired dwell time (from 1 second to 60 seconds and from 1 minute to 60
minutes).
Select the option "Mode."
Select the appropriate value: Off (Manual) or On (Auto).
Save the settings.
From the MAIN MENU, select DOME MOTION. The submenu DOME MOTION appears.
Select CALIBRATION. The screen CALIBRATION SETUP appears.
Select the option "Auto Cal". This function is for automatic calibration.
Select the appropriate value: AUTO or MANUAL.
In Manual mode, select the option "Calibration" to execute the function using the joystick.
Select the option "Yes" or press the [Near] button to continue.
Select the option "Error Msg Disp" (Error Message Display).
Select the appropriate option: ON or OFF.
Save the settings.
Operation Manual
On-Screen Display (OSD) Menu | en 61
2015.08 | |