Bosch VEZ-400 Series Operation Manual page 28

28 en | Installing a Wall Mount (AUTODOME 4000)
Figure 7.5: Location of parts of camera dome and mounting cap
Number
1
2
3
4
5
6
7
2.
3.
2015.08 | |
Description
Dome cover mounting screws
Rubber sealing rings for mounting screws
Dome cover
Mounting screws
Rubber sealing rings for mounting screws
Camera base
Mounting cap
Align the camera base with the mounting cap, and mount the base to the mounting cap
using the four (4) mounting screws supplied with the camera. In moist, wet, or outdoor
applications, make sure that all four mounting screws are equipped with a rubber seal
ring, and that they are fully tightened to ensure protection against water ingress.
Mount the dome cover to the camera base. In moist, wet, or outdoor applications, make
sure that all three mounting screws are equipped with a rubber seal ring, and that they
are tightened fully to ensure protection against water ingress.
Operation Manual
AUTODOME 4000 Mini PTZ Dome
Bosch Security Systems, Inc.