Password; Display Setup - Bosch VEZ-400 Series Operation Manual

AUTODOME 4000 Mini PTZ Dome
2.
3.
10.3.4

Password

Set a four-character password to prevent unauthorized access and changes to the camera
settings. Users/operators must enter the valid password before programming the camera. The
default password is "0000." To set/enable a password:
1.
2.
PASSWORD
CURRENT
ENABLE
NEW
CONFIRM
0123456789
-SET/CLEAR
-EXIT
1.
2.
3.
4.
10.4

Display Setup

DISPLAY SETUP
OSD SETUP
PRIVACY ZONE
IMAGE SETUP
MOTION/FACE
LANGUAGE: [language]
EXIT
Bosch Security Systems, Inc.
– [ETC: Clear other settings except camera and PTZ settings (CAM status and saved
PRESET, TOUR, PATTERN and SCAN).]
Select the value "Clear."
Save. The system restores the default settings of the camera.
From the MAIN MENU, select SYSTEM SETUP. The submenu SYSTEM SETUP appears.
Select PASSWORD. The screen PASSWORD appears.
Select the numbers that comprise the password.
Press the key {Tele}.
Select the option "Enable."
Select the value "Enable." The system locks the password.
Operation Manual
On-Screen Display (OSD) Menu | en 49
2015.08 | |