Bosch VEZ-400 Series Operation Manual page 68

68 en | Troubleshooting
Problem
The camera has 20
Privacy Masking
zones, but I can only
set 16.
I set Image Flip
function, but it is
disabled.
I set Image Inverse
function, but it is
disabled.
I want to use Privacy
Masking, but it is
disabled.
I cannot set a new
password.
I cannot record a
tour.
Auto SensUp Max
mode does not
function.
I set WDR function,
but it is disabled.
Digital Zoom
capability is limited.
I set multiple alarms,
but I see only one
triggered.
2015.08 | |
Solution
Motion Detection function is enabled. Only 16 zones can be displayed
when this function is enabled.
Privacy Masking function is enabled. When this function is enabled,
Image Flip function is disabled. Both functions cannot be enabled at
the same time.
Privacy Masking function is enabled. When this function is enabled,
Image Inverse function is disabled. Both functions cannot be enabled
at the same time.
Check that Image Flip function or Image Inverse Function is enabled.
When either of these functions is enabled, Privacy Masking is disabled
automatically.
Try entering the Master Password (9527) before setting a new
password.
Check the size of the memory buffer. Once the buffer reaches 100%,
the camera will not record a tour. Clear the buffer to regain memory
space.
Check that Enhancement function is enabled. When this function is
enabled, AutoSenUp Max does not function.
Check that Enhancement function is enabled. When this function is
enabled, WDR function is disabled.
Check that Enhancement function is enabled. When this function is
enabled, Digital Zoom capability is limited.
Check the priority numbers of the alarms. If two or more alarm pins
with the same priority number are triggered simultaneously, the
system gives higher priority to the alarm with the smaller number, and
handles only that alarm.
Operation Manual
AUTODOME 4000 Mini PTZ Dome
Bosch Security Systems, Inc.