4
BIOS AND DRIVER SETTING
4.1 BIOS Settings
4.1.1 BIOS Setup
The board uses UEFI BIOS that is use Serial Peripheral Interface (SPI)
Flash. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-
configuration utility, LAN, EEPROM information, and Serial port support. The
BIOS setup program is accessed by pressing the <Del> key after the Power-
On Self-Test (POST) memory test begins and before the operating system boot
begins. The menu bar is shown below.
Main
©Vecow RCS-7000 Series Robust Computing System User Manual
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
Chipset
Figure 4-1-1: BIOS Menu Bar
Boot
Security
Save & Exit
BIOS AND DRIVER SETTING
76