Ethernet Port - Vecow ECS-9240-GTX1050T User Manual

Multi-Stream Transport Display
Two panel Displays concurrently
Three panel Displays concurrently
2.2.8 USB 3.0
RST
There are 4 USB 3.0 connections available supporting up to 5GB per second
data rate in the front side of ECS-9200/9100 GTX1050. It is also compliant with
the requirements of Super Speed (SS), High Speed (HS), Full Speed (FS) and
Low Speed (LS).

2.2.9 Ethernet Port

RST
There are dual 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel I219 Ethernet Phy and
LAN 2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN
2 work in normal status, iAMT 11.0 function is enabled. When using suitable
RJ-45 cable, you can connect the system to other computers or to any other
devices with Ethernet connection; for example, a hub or a switch. Moreover,
both of LAN 1 and LAN 2 support Wake on LAN and Pre-boot functions. The
pin-outs of LAN 1 and LAN 2 are listed as follows:
©Vecow ECS-9200/9100 GTX1050 User Manual
One panel Display
SIM 2 SIM 3
1 2 3
SIM 1
WLAN
CFast
SIM 2 SIM 3
1 2 3
SIM 1
WLAN
CFast
Max. Resolution
4096x2304@60Hz
2880x1800@60Hz
2304x1440@60Hz
DVI-D
DP
DVI-I
DVI-D
DP
DVI-I
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
LAN 1
LAN 2
LAN 1
LAN 2
14