Setting One-Touch Connection Numbers; Making Screen Standby Settings; Making Sound Settings - Panasonic KX-VC1600 User Manual

Setting One-touch Connection
Numbers
Set the addresses or profiles assigned to the one-touch
connection numbers (1 to 5) displayed on the home
screen.
1.
Select "One-Touch Set." and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
2.
Use [ ][ ] to select ""Not Registered"".
3.
Press [B].
•
A dialogue box is displayed for selecting which
kind of input method to reference.
4.
Use [ ][ ] to select the reference source,
"Contact list" or "Profile" and press [ENTER].
When "Contact list" is selected:
The contact list selection screen is displayed.
1.
Use [ ][ ] to select the other party to
register, and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
When "Profile" is selected:
The profile list reference screen is displayed.
1.
Use [ ][ ] to select the group name you want
to register and press [ENTER].
•
The one-touch connection number settings
screen is displayed.
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.
Making Screen Standby
Settings
When the remote control is not operated or a video
conference call is not received for a specified length of
time, the unit enters standby mode. You can set the
length of time here.
Document Version 2015-08
1.
Select "Standby Setting" and press [ENTER].
•
The screen standby settings screen is
displayed.
2.
Enter the length of time (0–99) in minutes until the
unit enters screen standby mode (default: 10).
Note
•
If you set "0", the unit will not enter screen
standby mode automatically. However, if
you press the remote control's
[STANDBY] button, the unit will enter
screen standby mode even if "0" is set.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.

Making Sound Settings

1.
Select "Sound Settings" and press [ENTER].
•
The sound settings screen is displayed.
2.
Use [ ][ ] to select the following items for input:
"Welcome Screen Vol.": Press [ENTER] and use
[ ][ ] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") played at the
start-up.
"Ringback Tone Vol.": Press [ENTER] and use
[ ][ ] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") of an outgoing call
ring.
"Ring Tone Vol.": Press [ENTER] and use [
[ ] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") of an incoming call
ring.
"Ringback Tone": Press [ENTER] and use [
[ ] to select the calling sound pattern ("Pattern
1" to "Pattern 5") (default: "Pattern 1").
"Ring Tone": Press [ENTER] and use [
select the incoming call sound pattern ("Pattern
1" to "Pattern 5") (default: "Pattern 1").
"Default Sound Lev.": Use [
volume level (0–20) at the start of a video
conference call (default: 16).
"Sound Pre-sets": Press [ENTER] and use [
[ ] to select the tone ("More Highs",
Contacts and Settings
]
]
][ ] to
][ ] to select the
]
User Manual 109