Use [
][
•
The multicast target screen is displayed.
Note
•
To continue registering multicast targets, repeat the procedure from step 6.
•
Register multicast targets starting from the lowest available node ID. The node ID of a ""Not
Registered"" target cannot be selected for registration if it is not the lowest available number.
7.
Press [G].
•
A dialogue box to confirm the saving of settings is displayed.
8.
Use [
][
] to select "Yes" and press [ENTER].
•
The multicast tree screen is displayed.
Note
•
To continue registering multicast trees, repeat steps 2–8 of the procedure.
Editing Registered Contents
1.
In step 7 of "Administrator Menu List (Page 116)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
Use [
][
] to select the multicast tree to edit.
3.
Press [B].
•
The multicast tree setting screen is displayed.
4.
Use [
][
] to select the item to edit, and then edit it.
5.
Press [G].
•
A dialogue box to confirm the saving of settings is displayed.
6.
Use [
][
] to select "Yes" and press [ENTER].
•
The multicast tree screen is displayed.
Deleting Registered Contents
1.
In step 7 of "Administrator Menu List (Page 116)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
Use [
][
] to select the multicast tree to delete.
3.
Press [R].
•
A dialogue box to confirm the deletion is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The multicast tree screen is displayed.
Document Version 2015-08
] to select the other party to register and press [ENTER].
Using Multicast
User Manual
151