Updating Software - Panasonic KX-VC1600 User Manual

Contacts and Settings
–
"Multicast": The multicast enhanced
feature is enabled.
–
"Mobile Connection": The mobile
connection enhanced feature is enabled.
–
"None": No features have been activated.
2.
Press [G].
•
The registration key input screen is displayed.
3.
Enter the 16-digit registration key.
4.
Press [G].
•
A dialogue box to confirm the saving of settings
and system restart after saving is displayed.
5.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The system will automatically restart to reflect
changes to system settings.
Note
•
If the registration key you entered is invalid,
"Failed Registration Key code
authentication." is displayed. Repeat the
procedure from step 3. If this message is
displayed even when you have correctly
input the registration key that was issued,
contact your dealer.
•
Only one registration key can be registered
at once. To register multiple registration
keys for enabling multiple features, a restart
is necessary for each registration.
•
Activated features can also be checked on
the enhanced feature confirmation screen
(Page 114).

Updating Software

Note
•
If you want to update software using a USB
memory device, consult your dealer.
•
When updating software using a USB memory
device, note the following.
–
Save the software update file in the root
directory of the USB memory device.
–
Do not change the name of the software
update file.
–
Connect the USB memory device to the
USB jack on the back of the unit ahead of
time.
1.
Select "Software update" and press [ENTER].
•
The software update screen is displayed.
134 User Manual
2.
Use [ ][ ] to select "Update Method" and press
[ENTER].
3.
Use [ ][ ] to select "Network" or "USB" and
press [ENTER].
–
"Network": Updates the software from the
network.
–
"USB": Updates the software from a USB
memory device.
Note
•
If you want to select "USB", contact your
dealer for the details.
4.
When "Automatic Version Check" is set to
"ON" (Page 121):
The latest software version is displayed next to
"Available Software version :". Proceed to step
5 if there is an update available.
When "Automatic Version Check" is set to
"OFF" (Page 121) or when "Update Method" is
set to "USB" in step 3:
Use [ ][ ] to select "Software updates" and
press [ENTER].
•
The system checks for version updates. The
latest software version will be displayed next to
"Available Software version :". Proceed to
step 5 if there is an update available.
5.
Use [ ][ ] to select "Update Software Now"
and press [ENTER].
•
A dialogue box to confirm the updating of your
software is displayed.
Note
•
Please carefully read and confirm the
cautions in the dialogue box before
proceeding to the next step.
6.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The update is automatically downloaded and
installed.
•
To complete the update, the system will
automatically restart. Before restart, a message
will be displayed as detailed below.
Document Version 2015-08