Contacts and Settings
Making Codec Settings
These settings determine which codecs are enabled and disabled.
Note
•
Changing codec settings may affect the ability to make and receive calls. For details, contact your
dealer.
•
If "NAT Traversal Mode" is selected in the connection mode settings, codec settings will not be
displayed.
1.
Select "Codec Settings" and press [ENTER].
•
The codec settings screen is displayed.
2.
Select the following items for input.
•
The following items are displayed over 2 pages. Press [B] to move to the H.323 setting screen. To
return to the SIP setting screen, press [B] again.
"SIP / Video System"/"SIP / Audio System"/"H.323 / Video System"/"H.323 / Audio System": Use
[
][
] to select the item that you want to change and press [ENTER].
•
Checkmarks are added or removed. Codecs without a checkmark are disabled.
•
By default, all are enabled.
Note
•
The setting of "H.264 / Baseline Profile (PktMode0)" codec for "H.323 / Video System" and the
setting of "G.722" codec for "H.323 / Audio System" cannot be changed.
•
The setting of "H.264 / Baseline Profile (PktMode0)" codec for "SIP / Video System" and the
setting of "G.722" codec for "SIP / Audio System" cannot be changed.
"SIP / QoS"/"H.323 / QoS": Press [ENTER] and use [
–
"ON" (default): QoS will be enabled.
–
"OFF": QoS will be disabled.
3.
Press [G].
•
A dialogue box to confirm the saving of settings is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.
126
User Manual
][
] to select whether to enable QoS.
Document Version 2015-08