•
When a contact in the incoming call history is
newly added to your contact list, the incoming call
history will be updated to display the contact's
information from the contact list.
•
When a party that is not registered in your contact
list is selected, if you press [B], the contact list
registration screen will be displayed and a new
contact can be registered (Page 93). Also, you
may not be able to register a SIP URI (or SIP user
name), H.323 extension, or H.323 name from the
incoming call history to the contact list for
reasons such as non-compliance with the
relevant standards. In this case, contact your
network administrator.
3
Select the party you want to call using [
Note
•
If you press [ENTER], the call history details
screen is displayed. (Not displayed when the
multicast call history (outgoing) is selected.)
•
When not selecting a local site (Page 97), the
values of the basic settings are displayed for
"Local site name".
•
"Bandwidth" displays the mediated bandwidth
for connected sites.
•
Depending on the other party, "Device type"
may be blank.
4
Press [START].
•
The manual dial screen is displayed. (Not displayed
when the multicast history was selected.)
Note
•
You can change the number of sites called
or edit the other party's address.
5
Press [START] to start the call.
6
When you want to end the call, press [END].
•
The Home screen is displayed.
Document Version 2015-08
][
].
Starting a Video Conference
User Manual
57