Setting The Mcu - Panasonic KX-VC1600 User Manual

to become unable to communicate with
other parties.
•
Be aware that if encryption is disabled,
eavesdropping might be possible on
networks that are not secured against such
actions.
•
If you cannot specify a value for
"Encryption (SIP)"/"Encryption (H.
323)"/"Encryption (NAT Traversal)"
because the setting is unavailable, contact
your network administrator.
"Server Port": Press [ENTER] and use [
select the port to use when connecting using NAT
Traversal Mode.
–
"Default" (default): A normally-used port will be
automatically selected.
–
"Alternate": Set when communication cannot
be performed normally.
Note
•
Displayed when "Connection mode" is set
to "NAT Traversal Mode" or "IP / NAT
Traversal Mode".
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.

Setting the MCU

1.
Select "MCU Settings" and press [ENTER].
•
The settings screen of the built-in MCU is
displayed.
2.
Use [ ][ ] to select the following items for input:
•
The following items are displayed over 2 pages.
To view all the items, press [R] to move to the
next page, and press [B] to move to the
previous page.
"Screen Layout": Press [ENTER] and use [
[ ] to select the screen layout.
–
"Auto" (default): Automatically changes the
layout depending on the number of parties
joining a video conference call.
–
"CP1-CP10": Sets the screen layout manually.
Document Version 2015-08
Note
•
When "Auto" is selected, the layout
changes automatically depending on the
number of sites joining the conference.
Number of Sites
1–2
3–4
5–6
][ ] to
7–8
9
10
•
The screen layout during a conference call can
be selected from the following 7 patterns. The
numbers in the layout configurations indicate
each site's image display priority.
Layout Number
CP1
CP2
CP4
CP6
]
CP8
Contacts and Settings
Layout Number
CP1
CP4
CP6
CP8
CP9
CP10
Layout Configuration
1
1 2
1 2
3 4
2
1
3
4 5 6
2
1 3
4
5 6 7 8
User Manual 107