Table of Contents
Advertisement
14
Automatic Dialing
2r,
A
AT
Storing Phone Numbers in Memory
You can store up to 10 numbers in the unit using the remote control.
The dialing buttons (0 to 9) function as memory stations. The DIGITAL
SP-PHONE indicator light must be off. Point the infrared transmitter
towards the remote sensor while storing.
1 Press
(PROGRAM).
o The MUTE/PROGRAM
indicator on the unit
flashes.
Memory Station
Number
2 Enter a phone number
up to 16 digits.
e If you misdial, press
PROGRAM) to end
PROGRAM
storing, then restart from
step 1.
AUTO
3 Press (AUTO).
4 Press a memory station
number (0 to 9).
* A confirmation tone
sounds. (See next page.)
e To store other numbers,
repeat steps 1 through 4.
MUTE/PROGRAM
Indicator
e If the AC adaptor is disconnected for more than 3 days, the stored
numbers should be confirmed again before dialing.
Advertisement
Table of Contents
