Panasonic KX-VC1600 User Manual page 86

Controlling a Video Camera
"White Balance" screen
This function adjusts the colour so that white colours always appear
white under various types of light sources.
"White Balance": Press [ENTER] and use [
desired value for the white balance ("Auto", "Indoor 1", "Indoor
2", "Outdoor (Sunny)", "Outdoor (Cloudy)", or "Calibrate").
Note
•
Unless the colour is unnatural due to the light source, for
instance, select "Auto".
•
"Indoor 1" is recommended if the light source is an
incandescent lamp, etc. "Indoor 2" is recommended if the
light source is a warm, white fluorescent lamp, sodium
vapour lamp, etc.
•
When "Calibrate" is selected, you can adjust the white
balance. Perform the following procedure:
1.
Press [ENTER].
•
2.
Turn a piece of white paper toward the video camera.
3.
Press [G].
"Focus" screen: Use [
"Focus Position": Press [ENTER] and use [
"Center" or "Sides (Wide)".
"Focus Mode": Press [ENTER] and use [
"Auto" or "Manual".
Note
•
When "Manual" is selected, you can adjust the focus by
pressing the buttons on the remote control.
[B]: Near
[R]: Far
"Backlight" screen
This function adjusts the colour so that backlit objects do not appear
dark.
"Backlight Compensation": Press [ENTER] and use [
select "ON" or "OFF".
"Flicker" screen
This function corrects screen flicker.
"Flicker Compensation": Press [ENTER] and use [
select "ON" or "OFF".
86 User Manual
If the white balance had been set before by
selecting "Calibrate", that previously set state will
be recalled.
][ ] to select the following items for input:
][ ] to select the
][ ] to select
][ ] to select
][ ] to
][ ] to
Document Version 2015-08