Panasonic KX-VC1600 User Manual page 128

Contacts and Settings
–
"Other / Content": Displays the image of the
other party using HDMI1, and your own site's
shared contents using HDMI2.
–
"Content / Content": Displays the image of
your own site's shared contents using HDMI1
and HDMI2.
"Output of HDMI 3" (KX-VC1600 only): Press
[ENTER] and use [
HDMI3.
–
"Local site video" (default): Outputs your own
site's image to HDMI3.
–
"Rec (HDMI 1 / LR-Split)": Split the signals of
HDMI1 for video and audio recording,
outputting L (other sites' audio) and R (your own
site's audio) to HDMI3.
–
"Rec (HDMI 1 / LR-Mix)": Combine the signals
of HDMI1 for video and audio recording,
outputting L (other sites' audio) and R (your own
site's audio) to HDMI3.
–
"Rec (HDMI 2 / LR-Split)": Split the signal of
HDMI2 for video and audio recording,
outputting L (other sites' audio) and R (your own
site's audio) to HDMI3.
–
"Rec (HDMI 2 / LR-Mix)": Combine the signals
of HDMI2 for video and audio recording,
outputting L (other sites' audio) and R (your own
site's audio) to HDMI3.
Note
•
When your own site's image is selected,
use the video camera at a resolution of
1080p/1080i. 720p cannot be used.
"Analog compo. video output" (KX-VC1600
only): Press [ENTER] and use [
settings for analogue component output.
–
"Same as HDMI 1" (default): Outputs an
analogue component signal that is the same
image as for HDMI1.
–
"Same as HDMI 2": Outputs an analogue
component signal that is the same image as for
HDMI2.
"Max. Resolution" (KX-VC1600 only): Press
[ENTER] and use [
"1080i" (default) or "1080p".
Note
•
The set maximum resolution that will be
applied will be for analogue component
output and an HDMI output equivalent to
analogue component.
128 User Manual
][ ] to select the output to
][ ] to select
][ ] to select
"Display position of local site": Press [ENTER]
and use [ ][ ] to select the picture-in-picture
display position of your site's image.
–
"Upper right" (default): Your image is
displayed at the upper-right part of the screen.
–
"Lower right": Your image is displayed at the
lower-right part of the screen.
–
"Upper left": Your image is displayed at the
upper-left part of the screen.
–
"Lower left": Your image is displayed at the
lower-left part of the screen.
3.
Press [G].
•
A dialogue box to confirm the changing of
settings is displayed.
4.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.
Document Version 2015-08