Displaying the Connection Status
Displaying Unit Information
Note
•
Describes the information displayed for devices other than those that are currently being used in a
multicast. For the display of information for devices that are currently being used in a multicast, refer
to "Confirming the Transmission Status During a Multicast (Multicast Terminal) (Page 154)" and
"Confirming the Transmission Status During a Multicast (Relay Terminal/Receiver Terminal)
(Page 155)".
1
Press [STATUS] twice.
•
The unit information screen is displayed.
The unit information display screen is displayed over 2 to 3
screens. To view all the items, press [R] to move to the next
page, and press [B] to move to the previous page.
Note
•
The status of communication encryption (ON/OFF/
Best effort) is displayed under "Encryption
(SIP)"/"Encryption (H.323)"/"Encryption (NAT
Traversal)".
•
The first and second pages display information for
your own site, and the third page (only during a video
conference call) displays information for the other
party's site. During a multiple-party video conference
call, pressing [G] on the third page will display the
site selection dialogue box, where the displayed site
can be changed.
•
The third page of information can be used to confirm
the network's status during a call, including the
connection bandwidth and the packet loss ratio.
90
User Manual
1
Document Version 2015-08