Making Connection Mode Setting; Making Sip Settings - Panasonic KX-VC500 Operating Manual

Making Connection Mode
Setting
1.
Login to the administrator menu (Page 96).
•
The admin menu screen is displayed.
2.
Use [ ][ ] to select "Connection mode" and
press [Enter].
•
The connection mode setting screen is
displayed.
3.
Use [ ][ ] to select the desired connection
mode.
"IP Mode": Communication is established over the
Internet or an intranet.
"NAT Traversal Mode": Communication is
established using KX-VC Series NAT Traversal
Service.
Note
•
Communication cannot be established with
a party whose connection mode setting
differs from yours.
•
"NAT Traversal Mode" can be used only
after activating KX-VC Series NAT
Traversal Service with an activation key.
For details about KX-VC Series NAT
Traversal Service, refer to the following web
site:
http://panasonic.net/psn/products/hdvc/
nat_traversal/index.html
4.
Press [G].
•
A dialogue box to confirm the saving of settings
and system restart after saving is displayed.
5.
Use [ ][ ] to select "Yes" and press [Enter].
•
The system will automatically restart to reflect
changes to system settings.
Note
•
When changing the connection mode, the time
required for a restart may depend on network
conditions.

Making SIP Settings

When using a SIP server over an intranet, video
conference calls can be made using SIP URIs (SIP user
name@SIP domain name).
Note
•
These settings can only be made in IP mode
(Page 99).
•
Video conference calls to an MCU or a
non-Panasonic video conference system
through a SIP server using a SIP URI are not
guaranteed.
•
When connecting to an MCU by entering the
MCU's conference room number@IP address,
"SIP Server" must be set to "OFF".
•
When there is a problem with the SIP server, or
when SIP settings are incorrect (on the server
or on the unit), etc., and video conference calls
cannot be made, on the Home screen the SIP
user name is not displayed, and instead "SIP is
not registered" is displayed. In this case, you
cannot make calls using IP addresses as well
as SIP. Contact your network administrator.
1.
Login to the administrator menu (Page 96).
•
The admin menu screen is displayed.
Contacts and Settings
User Manual 99