Contacts and Settings
2.
Use [
][
] to select "Update Settings" and
press [Enter].
•
The update settings screen is displayed.
3.
Use [
][
] to select the following items for input:
"Proxy Server Addr.": Enter the IP address of the
proxy server.
•
If the IP address contains 1 or 2 digit numbers,
enter these numbers as they are. Do not enter
like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"Proxy Server Port": Enter the proxy server port
number (1–65535).
"Automatic Version Check": Use [
select "ON" or "OFF" (default).
•
When "ON" is selected, the unit will
automatically look up the DNS server or proxy
server to see if there are updates for your
software on start-up. If updates are available, a
dialogue box is displayed on the Home screen.
•
When "OFF" is selected, the unit will not
automatically look up the DNS server or proxy
server to see if there are updates for your
software on start-up.
4.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
5.
Use [
][
] to select "Yes" and press [Enter].
•
The admin menu screen is displayed.
6.
Press [Home].
•
The Home screen is displayed.
108
User Manual
Making Connection Mode
Setting
1.
Login to the administrator menu (Page 105).
•
2.
Use [
press [Enter].
•
3.
Press [Enter], use [
connection mode, and then press [Enter] again.
"IP Mode": Communication is established over the
Internet or an intranet.
][
] to
"NAT Traversal Mode": Communication is
established using KX-VC Series NAT Traversal
Service.
Note
4.
Press [G].
•
The admin menu screen is displayed.
][
] to select "Connection mode" and
The connection mode setting screen is
displayed.
][
•
Communication cannot be established with
a party whose connection mode setting
differs from yours.
•
"NAT Traversal Mode" can be used only
after activating KX-VC Series NAT
Traversal Service with an activation key.
For details about KX-VC Series NAT
Traversal Service, refer to the following web
site:
http://panasonic.net/psn/products/hdvc/
nat_traversal/index.html
A dialogue box to confirm the saving of settings
and system restart after saving is displayed.
] to select the desired