Setting The System; Setting Multicast; Making Administrator Menu Settings; Registering The Multicast Tree - Panasonic KX-VC1600 User Manual

Using Multicast
Note
•
During the multicast, if the connection bandwidth drops, the sending bandwidth will drop as well,
lowering the resolution and/or the frame rate.
•
The quality of the multicast video and audio is affected by packet round trip time (RTT), the packet loss
ratio, and the number of packets re-sent. Terminals store approximately 1 second of data for resending,
but if sending/receiving is delayed beyond this, the image may become corrupted. For details on
network design that takes into account issues such as round trip time and the packet loss ratio, contact
your dealer.

Setting the System

Setting Multicast

1.
In step 3 of "Changing System Settings/Performing System Maintenance (Page 99)", select "Multicast
Setting" and press [ENTER].
•
The multicast setting screen is displayed.
2.
Press [ENTER] and use [
feature.
–
"MIC·Audio In" (default): Audio is input from both the Boundary Microphone and the RCA inputs.
–
"Audio In": Audio is input from the RCA inputs.
Note
•
"Multicast Setting" is displayed when "Multicast" in "Enhancement" is enabled.

Making Administrator Menu Settings

Registering the Multicast Tree

Sets the terminals and multicast conditions registered for the multicast tree. Up to 10 multicast trees can be
registered.
New Registration
1.
In step 7 of "Administrator Menu List (Page 116)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
Use [ ][ ] to select ""Not Registered"".
148 User Manual
][ ] to select the microphone of the multicast terminal to use for the multicast
Document Version 2015-08