Installation And Removal Of Power Supply Modules - ATTO Technology FibreBridge 7500 Installation And Operation Manual

Installation and Removal of Power Supply
Modules
1 To remove a power supply module, first remove
the power cord.
2 Press the side latch inward and pull out on the
handle
Exhibit 2.0-4
6
ATTO Technology Inc. FibreBridge Installation and Operation Manual
3 To install a power module, insert module until
you hear the latch click.
Note
Handle and latch should be on top.
4 Install power cord.
CAUTION CAUTION
Remove the power source before removing
the power supply module. Failure to do so
may cause injury or damage the unit.