Table of Contents
Advertisement
Alternative methods to the ATTO ExpressNAV Interface may be used to manage the FibreBridge. ATTO
ExpressNAV System Manager is the recommended interface.
Using ExpressNAV System Manager
Each page in the ATTO ExpressNAV System Manager
provides information and/or configuration parameters
based on a specific topic.
ATTO ExpressNAV is the recommended management
tool for the FibreBridge. It is a web-based graphical
user interface (GUI) that allows you to manage the
FibreBridge by clicking choices and commands in
traditional GUI fashion or by entering CLI commands
directly, as you would in a terminal emulation session,
on the Advanced CLI Configuration page.
Opening an ExpressNAV session
1
Point your browser at the IP address of the
FibreBridge. Refer to
page 4.
2
The ExpressNAV home page is displayed.
Click Enter.
3
Enter the user name and password values.
Note
The default values are user name: root and
password: Password. The user name is case
insensitive and password is case sensitive. It
is best practice to change user names and
passwords. Refer to
page 7.
The Status page appears.
Using the serial port
1
Connect a cable from FibreBridge RS-232
serial port to the serial (COM) port on a
personal computer.
2
Turn on the FibreBridge.
3
Start a terminal emulation program on the
personal computer, and use it to connect to the
FibreBridge. For example, if you are using
HyperTerminal on a computer running a
Windows operating system,
a. Type FibreBridge in the New
Connection dialog box.
14
ATTO Technology Inc. FibreBridge Installation and Operation Manual
5.0 Interface Options
Discover the IP address
Modify passwords
on
Each page can be reached through the menu at the
side of each page. An image on each page's header
shows each port in the product faceplate. Each port is
clickable and takes you to the appropriate page.
If you have completed configuration operations and
have clicked Submit on the page you are viewing, go
to the Restart page and restart the FibreBridge to
save the settings.
If you have not completed configuration changes, go
on to the next page.
Optimizing ExpressNAV in Internet
Explorer
on
1
Go to the browser toolbar and select Tools.
2
Select Internet Options.
3
Select the Security tab.
4
Click on the Trusted Sites icon.
5
Select the Custom Level button.
6
Go to the Miscellaneous topic and set the
Allow META REFRESH option to Enable.
7
Press the OK button in the open dialogs to
apply the updated settings.
b. Click OK.
c. In the Connect To dialog box, for the
Connect using field select the COM
port number to which your serial cable
is connected.
d. Click OK.
e. In the COM Properties dialog box
select the following values:
• Bits per second: 115200
• Data Bits: 8
• Parity: None
Advertisement
Table of Contents
