Table of Contents
Advertisement
3.2 Remote Monitoring, Management
The Ethernet port provides monitoring and management using the ExpressNAV System Manager.
Remote system monitoring may be set up through the
Remote Management page of the ExpressNAV
interface (see Exhibit 3.0-3, below) using the Simple
Network Management Protocol (SNMP) or Email.
Various types of problems may create a notification:
• Device errors such as medium error, aborted
command and hard error
• Device transitions from online to offline
• Critical and warning temperature conditions
• Power supply status conditions
Messages may state that a device is not working, a
medium has an error, or a command has been
stopped.
Exhibit 3.0-3 The Remote Management page in the ExpressNAV System Manager.
10
ATTO Technology Inc. FibreBridge Installation and Operation Manual
You may designate which warning level a recipient
receives. For example, a recipient with a critical
severity level only receives critical messages and not
warning or informational messages.
In both monitoring systems, you select the warning
levels for each recipient:
• All: all warnings, critical events and
informational messages
• Warning: events which are either warnings or
critical events
• Critical: only events which are critical
• None: no messages are sent
Advertisement
Table of Contents
