Table of Contents
Advertisement
To configure the ATTO FibreBridge, use the ATTO ExpressNAV System Manager GUI. Default values are
appropriate for most configurations, but may be modified.
The best way to access the FibreBridge to view
and change settings is to use ATTO ExpressNAV
System Manager, a browser-based graphical
interface. Other methods are also available. Refer to
5.0 Interface options
on page 14.
Help is available from within ExpressNAV by clicking
on the text indicating each setting. For more
information on any of these parameters, refer to
the specific CLI command in
on page v of the Appendix.
To change mapping, refer to
To use Email notification or SNMP, refer to
Remote monitoring, management
You may make changes to several pages before
going to the Restart page and restarting the
FibreBridge to save the changes.
Preliminary steps
1
If you are not already
in the ExpressNAV
interface, type the IP
address of your
FibreBridge in a
standard browser as
found in
Using
ExpressNAV System
Manager
on page 14,
click Enter Here,
type in your user
name and password,
and click OK.
2
The Status page
appears. Choose
one of the following
options:
• View all settings to
ensure they are appropriate for your
configuration.
• Keep the automatic settings created when
you powered up your Fibre Bridge and do
nothing, accepting all the default settings
for all ports.
3.0 Configure the FibreBridge
Command explanations
Map Devices
on page 8.
on page 10.
• Use the individual pages listed on the side
menu to make changes or use other features
such as Email notification or SNMP as
needed.
Port configurations
1
Follow the Preliminary steps.
2
Click on the port you wish to configure on the
left hand menu: Ethernet, Serial Port or Fibre
Channel.
3
Select the parameters you wish to change.
4
Click Submit.
5
If you have completed all changes for this
session, go to the Restart page and restart the
Fibre Bridge.
Modify passwords
1
Follow the Preliminary steps.
2
From the side menu select Bridge. The Bridge
Configuration page is displayed.
The Administrator user name that you are
currently logged in with and the current read
only user name, if present, are displayed in
their text boxes.
3
Enter the Administrator (Admin) password
where indicated.
4
Enter appropriate information into the New
Admin Password, Confirm New Admin
Password or New Read Only Password and
7
Advertisement
Table of Contents
