ATTO Technology FibreBridge 7500 Installation And Operation Manual page 29

HGRename
Renames an existing Host Group.
HGRename [PrevHostGroupName]
[NewHostGroupName]
IdentifyBridge
IdentifyBridge causes the 'Alert' LED to blink to enable
identification of this system. Disable this option to cancel the
blinking.
Default: disabled
set IdentifyBridge [enabled | disabled]
get IdentifyBridge
IdentifyLUN
Lights the LED(s) of disk drive(s) associated with one or more
FC LUNs.
IdentifyLUN [lun]
Info
Info displays version numbers and other product information for
key components. Use the optional 'brief' parameter to show a
more concise subset of system information.
Info <brief>
IPAddress
IPAddress controls the current IP address of any Ethernet
port(s). If IPDHCP is enabled, then the 'get' command reports
the current IP address assigned by the network DHCP server,
followed by the (DHCP) identifier.
Default: 10.0.0.1
set IPAddress [mp[n]] [xxx.xxx.xxx.xxx]
Requires a SaveConfiguration Restart command
get IPAddress [mp[n] |all]
IPDHCP
IPDHCP allows acquisition of an IP address from a network
DHCP server. When this option is disabled, the IP address used
will be specified by the IPAddress CLI command.
Default: enabled
set IPDHCP [mp[n]] [enabled | disabled]
Requires a SaveConfiguration Restart command
get IPDHCP [mp[n] | all]
IPDNSServer
Controls the current DNS Server address. If
enabled, then this value is automatically detected. If
is disabled, then this value must be manually set.
set IPDNSServer [xxx.xxx.xxx.xxx]
get IPDNSServer
ix
ATTO Technology Inc. FibreBridge Installation and Operation Manual
IPGateway
IPGateway controls the current default gateways used by any
Ethernet port(s). If
reports the current IP gateway assigned by the network DHCP
server.
Default: 0.0.0.0
set IPGateway [mp[n]] [xxx.xxx.xxx.xxx]
Requires a SaveConfiguration Restart command
get IPGateway [mp[n] |all]
IPSubnetMask
IPSubnetMask controls the current subnet masks used by any
Ethernet port(s). If
reports the current IP subnet mask assigned by the network
DHCP server.
Default: 255.255.0.0
set IPSubnetMask [mp[n]] [xxx.xxx.xxx.xxx]
Requires a SaveConfiguration Restart command
get IPSubnetMask [mp[n] |all]
IsReserved
IsReserved displays the reservation status of the current
services session/interface.
IsReserved
MaxOpTemp
Regulates/displays the maximum enclosure temperature alarm
of the FibreBridge in degrees Celsius. If the temperature of the
FibreBridge rises above the maximum MaxOpTemp, thermal
control event handling occurs. Valid entries are between 75
degrees and 90 degrees.
Default: 90
set MaxOpTemp [75-90]
Requires a SaveConfiguration Restart command
get MaxOpTemp
MinOpTemp
Regulates/displays the minimum enclosure temperature alarm
of the FibreBridge in degrees Celsius.Valid entries are between
0 degrees and 15 degrees.
Default: 0
set MinOpTemp [0-15]
Requires a SaveConfiguration Restart command
get MinOpTemp
IPDHCP is
OEMConfigFile
IPDHCP
Returns the "name" (the contents of the first record) of the OEM
configuration file stored in persistent memory.
get oemconfigfile
IPDHCP is enabled, the 'get' command
IPDHCP is enabled, the 'get' command