Removing The Starter Clutch - Yamaha FZ6-SS 2004 Service Manual

STARTER CLUTCH AND GENERATOR
5-35
5. Remove:
S generator rotor 1
(with the flywheel puller 2 and flywheel pull-
er attachment)
S woodruff key
CAUTION:
To protect the end of the crankshaft, place
an appropriate sized socket between the fly-
wheel puller set's center bolt and the crank-
shaft.
NOTE:
Make sure the flywheel puller is centered over
the generator rotor.
Flywheel puller
90890-01362, YU-33270
Flywheel puller attachment
90890-04089, YM-33282

REMOVING THE STARTER CLUTCH

1. Remove:
S starter clutch bolt 1
NOTE:
S While holding the generator rotor with the
sheave holder, remove the starter clutch bolt.
S Do not allow the sheave holder to touch the
projection on the generator rotor.
Sheave holder
90890-01701, YS-01880-A
ENG