CHANGING THE ENGINE OIL
5. If the oil filter cartridge is also to be replaced,
perform the following procedure.
a. Remove the oil filter cartridge 1 with an oil
filter wrench 2 .
b. Lubricate the O-ring 3 of the new oil filter
cartridge with a thin coat of engine oil.
CAUTION:
Make sure the O-ring 3 is positioned cor-
rectly in the groove of the oil filter cartridge.
c. Tighten the new oil filter cartridge to specifi-
cation with an oil filter wrench.
6. Replace:
S engine oil drain bolt gasket
7. Install:
S engine oil drain bolt
(along with the new gasket)
8. Fill:
S crankcase
(with the specified amount of the recom-
mended engine oil)
3-28
CHK
ADJ
Oil filter wrench
90890-01426, YU-38411
Oil filter cartridge
17 Nm (1.7 mSkg, 12 ftSlb)
43 Nm (4.3 mSkg, 31 ftSlb)
Quantity
Total amount
3.4 L (2.99 Imp qt, 3.59 US qt)
Without oil filter cartridge
replacement
2.5 L (2.20 Imp qt, 2.64 US qt)
With oil filter cartridge
replacement
2.8 L (2.47 Imp qt, 2.96 US qt)
New