Yamaha FZ6-SS 2004 Service Manual page 199

FRONT FORK
7. Install:
S dust seal 1
(with the fork seal driver weight)
Fork seal driver weight
90890-01367
8. Fill:
S front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
0.467 L (0.41 Imp qt, 0.49 US qt)
Recommended oil
Suspension oil "01" or
equivalent
CAUTION:
S Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
S When disassembling and assembling the
front fork leg, do not allow any foreign ma-
terial to enter the front fork.
9. Measure:
S front fork leg oil level a
Out of specification ! Correct.
Front fork leg oil level (from the
top of the inner tube, with the
inner tube fully compressed and
without the fork spring)
134 mm (5.28 in)
NOTE:
S While filling the front fork leg, keep it upright.
S After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
4-53
CHAS