Assembling The Starter Motor - Yamaha FZ6-SS 2004 Service Manual

STARTER MOTOR
5. Measure:
S brush length a .
Out of specification ! Replace the brushes
as a set.
Brush length wear limit
3.5 mm (0.14 in)
6. Measure:
S brush spring force
Out of specification ! Replace the brush
springs as a set.
Brush spring force
7.16 X 9.52 N
(730 X 971 gf, 25.77 X 34.27 oz)
7. Check:
S gear teeth
Damage/wear ! Replace the gear.
8. Check:
S bearing
S oil seal
Damage/wear ! Replace the defective
part(s).
EAS00772

ASSEMBLING THE STARTER MOTOR

1. Install:
S brush seat 1
2. Install:
S armature 2
S O-ring 3
New
NOTE:
Align the tab a on the brush seat with the slot b
in the starter motor rear cover.
8-22
ELEC