Adjusting The Shift Pedal - Yamaha FZ6-SS 2004 Service Manual

BLEEDING THE HYDRAULIC BRAKE SYSTEM/

ADJUSTING THE SHIFT PEDAL

h. Tighten the bleed screw and then release the
brake lever or brake pedal.
i. Repeat steps (e) to (h) until all of the air
bubbles have disappeared from the brake
fluid in the plastic hose.
j. Tighten the bleed screw to specification.
Bleed screw
6 Nm (0.6 mSkg, 4.3 ftSlb)
k. Fill the brake fluid reservoir to the proper lev-
el with the recommended brake fluid.
Refer to "CHECKING THE BRAKE FLUID
LEVEL".
WARNING
After bleeding the hydraulic brake system,
check the brake operation.
EAS00136
ADJUSTING THE SHIFT PEDAL
1. Check:
S shift pedal position
Align the center of shift pedal 1 and center
of footrest bracket bolt 2 in a straight line.
Incorrect ! Adjust.
2. Adjust:
S shift pedal position
a. Loosen both locknuts 2 .
b. Turn the shift rod 3 in direction a or b to
obtain the correct shift pedal position.
a
Direction
b
Direction
c. Tighten both locknuts.
3-47
CHK
ADJ
Shift pedal is raised.
Shift pedal is lowered.