Yamaha FZ6-SS 2004 Service Manual page 198

FRONT FORK
Damper rod holder
90890-01294
T-handle
90890-01326
4. Install:
S outer tube bushing 1
(with the fork seal driver weight 2 and fork
seal driver attachment 3 )
Fork seal driver weight
90890-01367
Fork seal driver attachment
90890-01374
5. Install:
S washer
S oil seal 1
(with the fork seal driver weight and fork seal
driver attachment)
CAUTION:
Make sure the numbered side of the oil seal
faces up.
NOTE:
S Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
S Lubricate the outer surface of the inner tube
with fork oil.
S Before installing the oil seal, cover the top of
the front fork leg with a plastic bag 2 to protect
the oil seal during installation.
6. Install:
S oil seal clip 1
NOTE:
Adjust the oil seal clip so that it fits into the outer
tube's groove.
4-52
CHAS