Installation Diagram - Wilson Electronics AG Pro 75 Installation Manual

Installation Diagram

Note: The panel antenna may
be mounted on the wall directly
under the outside antenna if 20
feet of vertical separation can be
maintained. However, placing the
inside antenna in the ceiling is
the preferred method with the
best coverage.
Note: A lightning surge protector
is recommended for all building
installations. Make sure the
protector is installed in line
between the outside antenna and
the signal booster.
3
Contact Wilson Electronics Technical Support Team with any questions at
or email:
Minimum
vertical
separation
distance
20 feet
Outside
Antenna
Minimum
separation
distance 20
feet
Inside Antenna
Typical Installation