Installing The Inside Antenna - Wilson Electronics AG Pro 75 Installation Manual

Hide thumbs Also See for AG Pro 75:
Table of Contents

Advertisement

Installing the Inside Antenna

Find the desired location for the panel antenna . Verify that the
panel antenna and the outside antenna have the necessary
separation (Minimum of 20 vertical feet if installed with signal
booster set at a lower gain, for maximum gain you may need as
much as 50 feet of separation) . For optimum results the antenna
should be mounted at least 6 feet off the ground .
Inside
Antenna
Ceiling
Rafters
In some cases, multiple inside antennas may be required, for
instance if you have multiple rooms with poor signal . A signal may
be split by using a splitter . If using more than one inside antenna,
a separation of at least 20 feet is necessary between inside
antennas . See configuration on page 3 .
9
Contact Wilson Electronics Technical Support Team with any questions at
or email:
Optional Wide
Band Inside
Antenna (Sold
Separately)
-2
-
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents