SMART Board SB800ix2 Configuration And User's Manual page 83

APPENDIX C
ADJUSTING PROJECTOR SETTINGS
Setting Use
Gateway Displays the projector's default
network gateway in values
between 0.0.0.0 and
255.255.255.255.
DNS Displays the projector's primary
domain name server (DNS) IP
address in values between
0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector's MAC
address in xx-xx-xx-xx-xx-xx
format.
Group Name Displays the projector's
workgroup name as set by an
administrator (maximum 12
characters).
Projector Name Displays the projector's name
as set by an administrator
(maximum 12 characters).
Location Displays the projector's location
as set by an administrator
(maximum 16 characters).
Contact Displays the contact name or
number for projector support as
set by an administrator
(maximum 16 characters).
73 smarttech.com/kb/170340
Notes
You can set the projector's workgroup name
using the remote management features (see
Remotely managing your system through a
network interface on page 41 and Remotely
managing your system through an RS-232
serial interface on page 51).
You can set the projector's name using the
remote management features (see Remotely
managing your system through a network
interface on page 41 and Remotely managing
your system through an RS-232 serial
interface on page 51).
You can set the projector's location using the
remote management features (see Remotely
managing your system through a network
interface on page 41 and Remotely managing
your system through an RS-232 serial
interface on page 51).
You can set the contact name or number using
the remote management features (see
Remotely managing your system through a
network interface on page 41 and Remotely
managing your system through an RS-232
serial interface on page 51).