SMART Board SB800ix2 Configuration And User's Manual page 4

Interactive whiteboard systems
Hide thumbs Also See for SB800ix2:
Table of Contents

Advertisement

IMPORTANT INFORMATION
When mounting the projector boom on a framed or hollow wall, attach the mounting bracket to
l
a stud to safely support the projector's weight. If you use only drywall anchors, the drywall can
fail, resulting in possible personal injury, and damage to the product which may not be covered
by your warranty.
Do not leave cables on the floor where they can be a tripping hazard. If you must run a cable
l
over the floor, lay it in a flat, straight line and secure it to the floor with tape or a cable
management strip of a contrasting color. Handle cables carefully and avoid excessive
bending.
CAUTION
Do not operate this unit immediately after moving it from a cold location to a warm location.
l
When the unit is exposed to such a change in temperature, moisture can condense on the lens
and crucial internal parts. Allow the system to stabilize to room temperature before operation
to prevent possible damage to the unit.
Do not place the unit in hot locations, such as near heating equipment. Doing so could cause a
l
malfunction and shorten the life of the projector.
Avoid setting up and using the SMART product in an area with excessive levels of dust,
l
humidity and smoke.
Do not place your SMART product in direct sunlight or near any appliance that generates a
l
strong magnetic field.
If you need to lean the interactive whiteboard against a wall before you mount it, make sure it
l
remains in an upright position, resting on the pen tray brackets, which can sustain the weight
of the interactive whiteboard.
Do not rest the interactive whiteboard on its side or on the top of the frame.
You must connect the USB cable that came with your SMART Board interactive whiteboard to
l
a computer that has a USB compliant interface and that bears the USB logo. In addition, the
USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and
CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid damage to
the SMART Board interactive whiteboard.
IMPORTANT
ii
smarttech.com/kb/170340

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb800ix2-smp

Table of Contents