SMART Board SB800ix2 Configuration And User's Manual page 54

Interactive whiteboard systems
Hide thumbs Also See for SB800ix2:
Table of Contents

Advertisement

APPENDIX A
REMOTELY MANAGING YOUR SYSTEM THROUGH A NETWORK INTERFACE
Submenu setting
Auto Signal Detect
Lamp Reminder
Lamp Mode
Auto Power Off
Zoom
H-position (RGB input)
V-position (RGB input)
Aspect Ratio
44
smarttech.com/kb/170340
Description
Enables or disables signal searching of input connectors.
Select On to have the projector continuously switch inputs until
l
it finds an active video source.
Select Off to maintain signal detection in one input.
l
Select On to show or Off to hide the lamp replacement reminder
when it appears. This reminder appears 100 hours before the
recommended lamp replacement.
Adjusts lamp brightness to Standard or Economy. Standard
displays a high-quality, bright image. Economy increases the lamp
life by decreasing the brightness of the image.
Sets the length of the auto power off countdown timer between 1 and
240 minutes. The timer begins to count down when the projector no
longer receives a video signal. The timer finishes when the projector
enters Standby mode. Select 0 to turn off the timer.
Adjusts the zoom to the center of the image in or out from
0 to 30.
Moves the horizontal position of the source video left or right from 0 to
100 (relative to the projected image).
NOTE
This is useful in situations where the source video is cut off.
Moves the vertical position of the source video up or down from -5 to
5 (relative to the projected image).
NOTE
This is useful in situations where the source video is cut off.
Adjusts the image output to Fill Screen, Match Input or 16:9.
Fill Screen produces an image that fills the entire screen by
l
stretching and scaling.
Match Input matches the projector's aspect ratio to the input's
l
aspect ratio. As a result, black bands might appear along the top
and bottom edges of the screen horizontally (letterbox format) or
along the left and right edges of the screen vertically (pillarbox
format).
16:9 changes the output to 16:9 by letterboxing the image,
l
which is recommended for use with HDTV and DVDs enhanced
for wide-screen television.
NOTE
See Video format on page 75 for descriptions of each mode.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb800ix2-smp

Table of Contents